Cyanoacrylate Adhesives

Epoxy Thermally Conductive UL Recognized Urethane
Methacrylate Epoxy Anaerobic Thermally Conductive Electrically Conductive
Custom Formulations Product Modifications Toll Blending Custom Packaging
AN ELLSWORTH ADHESIVES COMPANY Ellsworth Adhesives Cynergy® Cyanoacrylates

Cyanoacrylate adhesives are single component, 100% solids, and cure very fast at room temperature without any mixing or heating required. Cyanoacrylates are also referred to as “Instant Adhesives”, “Super Glue”, or simply the acronym “CA” in the industrial market. CA’s in general, are acrylic resins that polymerize very rapidly when compressed into a thin film in the presence of moisture. The speed of this polymerization, or cure, which ranges from a few seconds up to a minute, depends on the surfaces to be bonded, the gap between the surfaces, as well as the viscosity and chemistry of the CA adhesive. As a rule of thumb, the higher the viscosity of the CA, and the larger the gap to be filled, the slower the cure. Likewise, the higher the pH and the higher the moisture content in the substrates, the faster the cure.

There are two basic types of CA chemistries that have been in use since the 1960’s. Methyl is a better bonder for metals and ethyl is a better bonder for plastics, rubbers and all other substrates. Over the past decade several specialty chemistries of CA’s and modifications to CA’s have been developed for higher performance as well as for bonding a greater variety of substrates.

Cynergy® Cyanoacrylates from Resinlab are available in basic methyl and ethyl grades as well as several specialty high performance grades. Cynergy® CA’s come in many viscosities, ranging from water thin wicking grades to nonsag gels. In addition, Cynergy® offers a full range of specialty grades, including surface insensitive CA’s for low pH substrates, clear & black rubber modified or toughened CA’s for high impact applications and low odor CA’s to eliminate any possible worker irritation or discomfort. Also, even though CA’s are solvent free, excess CA particles can become airborne, polymerize with moisture in the air, and then settle on the surface leaving a white residue. This “frosting or bloom” can be eliminated with another Cynergy® specialty grade CA. Cynergy® also offers a complete line of CA accessory products such as accelerators for faster, large gap or surface cure, a primer for very difficult to bond substrates, and a debonder. Cynergy® offers the widest variety and highest quality cyanoacrylates in the industry.


Shop a Large Portion of our Encapsulants & Adhesives Online
@
www.ellsworth.com
or call 1-866-322-8322
Cynergy® General Purpose Cyanoacrylate Adhesives

The Cynergy® 6000 SERIES are for use in demanding applications where very fast cure speeds are required. These are single component solvent free materials manufactured in a wide variety of viscosities and setting times to satisfy specific bonding applications. Substrates such a wood, plastics, metal, rubber, or other materials are bonded quickly and effectively with the Cynergy® 6000 series. These products are less dependent on surface moisture for achieving cure speed than most standard grades of cyanoacrylates.

Product Name Base Color Gap Fill (mil) Viscosity (cps) Shear Strength Temp. Range °F Cure Speed (fixture/full cure) MSDS
CA6001 Ethyl Clear 2 5 2700/4300 -65 to 200 >5 seconds / 8 hours CA6000 Series MSDS
CA6002 Ethyl Clear 2 5 2700/4300 -65 to 200 >10 seconds / 8 hours CA6000 Series MSDS
CA6003 Ethyl Clear 3 30 2700/4300 -65 to 200 >10 seconds / 8 hours CA6000 Series MSDS
CA6004 Ethyl Clear 4 45 2700/4300 -65 to 200 >8 seconds / 8 hours CA6000 Series MSDS
CA6005 Ethyl Clear 6 100 2700/4300 -65 to 200 >10 seconds / 8 hours CA6000 Series MSDS
CA6006 Ethyl Clear 6 200 2700/4300 -65 to 200 >10 seconds / 8 hours CA6000 Series MSDS
CA6007 Ethyl Clear 7 500 2700/4300 -65 to 200 >10 seconds / 8 hours CA6000 Series MSDS
CA6008 Ethyl Clear 7 750 2700/4300 -65 to 200 >12 seconds / 8 hours CA6000 Series MSDS
CA6009 Ethyl Clear 8 1000 2700/4300 -65 to 200 >15 seconds / 8 hours CA6000 Series MSDS
CA6010 Ethyl Clear 8 1500 2700/4300 -65 to 200 >15 seconds / 8 hours CA6000 Series MSDS
CA6011 Ethyl Clear 8 2000 2700/4300 -65 to 200 >15 seconds / 8 hours CA6000 Series MSDS
CA6012 Ethyl Clear 8 2400 2700/4300 -65 to 200 >15 seconds / 8 hours CA6000 Series MSDS
CA6013 Ethyl Clear 8 3200 2700/4300 -65 to 200 >15 seconds / 8 hours CA6000 Series MSDS
CA6014 Ethyl Clear 8 4000 2700/4300 -65 to 200 >15 seconds / 8 hours CA6000 Series MSDS
CA6015 Ethyl Clear 10 GEL 2700/4300 -65 to 200 >25 seconds / 8 hours CA6000 Series MSDS
Cynergy® Metal Bonding Cyanoacrylate Adhesives

The Cynergy® 6100 SERIES products are used to bond metal to itself or other substrates. They are available in five standard viscosities.

Product Name Base Color Gap Fill (mil) Viscosity (cps) Shear Strength Temp. Range °F Cure Speed (fixture/full cure) MSDS
CA6101 Methyl Clear 2 5 2800/4000 -65 to 200 >5 seconds / 8 hours CA6100 Series MSDS
CA6102 Methyl Clear 4 60 2800/4000 -65 to 200 >8 seconds / 8 hours CA6100 Series MSDS
CA6103 Methyl Clear 8 100 2800/4000 -65 to 200 >10 seconds / 8 hours CA6100 Series MSDS
CA6104 Methyl Clear 8 1000 2800/4000 -65 to 200 >10 seconds / 8 hours CA6100 Series MSDS
CA6105 Methyl UV Tracer 8 2000 2800/4000 -65 to 200 >10 seconds / 8 hours CA6100 Series MSDS
Cynergy® Surface Insensitive Cyanoacrylate Adhesives

The Cynergy® 6200 SERIES products are for use in demanding applications where very fast cure speeds are required. Also used when difficult to bond and acidic surfaces are used such as EPDM, plasticized materials such as PVC and wood.

Product Name Base Color Gap Fill (mil) Viscosity (cps) Shear Strength Temp. Range °F Cure Speed (fixture/full cure) MSDS
CA6201 Ethyl Clear 2 5 2800/4200 -65 to 200 >5 seconds / 8 hours CA6200 Series MSDS
CA6202 Ethyl Clear 4 30 2800/4200 -65 to 200 >5 seconds / 8 hours CA6200 Series MSDS
CA6203 Ethyl Clear 6 120 2800/4200 -65 to 200 >8 seconds / 8 hours CA6200 Series MSDS
CA6204 Ethyl Clear 7 500 2800/4200 -65 to 200 >8 seconds / 8 hours CA6200 Series MSDS
CA6205 Ethyl Clear 8 1000 2800/4200 -65 to 200 >8 seconds / 8 hours CA6200 Series MSDS
CA6206 Ethyl Clear 8 1500 2800/4200 -65 to 200 >8 seconds / 8 hours CA6200 Series MSDS
CA6207 Ethyl Clear 9 2000 2800/4200 -65 to 200 >8 seconds / 8 hours CA6200 Series MSDS
CA6208 Ethyl Clear 9 3200 2800/4200 -65 to 200 >10 seconds / 8 hours CA6200 Series MSDS
CA6209 Ethyl Clear 9 4000 2800/4200 -65 to 200 >10 seconds / 8 hours CA6200 Series MSDS
CA6210 Ethyl Clear 10 GEL 2800/4200 -65 to 200 >8 seconds / 8 hours CA6200 Series MSDS
Cynergy® Fast Setting Cyanoacrylate Adhesives

The Cynergy® 6300 SERIES products are for use in applications where a faster set time is desired or low moisture conditions exist. Provides good bonds to a wide variety of materials.
Product Name Base Color Gap Fill (mil) Viscosity (cps) Shear Strength Temp. Range °F Cure Speed (fixture/full cure) MSDS
CA6301 Ethyl Clear 2 5 2700/4200 -65 to 200 >2.5 seconds / 4 hours CA6300 Series MSDS
CA6302 Ethyl Clear 3 30 2700/4200 -65 to 200 >5 seconds / 4 hours CA6300 Series MSDS
CA6303 Ethyl Clear 6 120 2700/4200 -65 to 200 >5 seconds / 4 hours CA6300 Series MSDS
CA6304 Ethyl Clear 7 500 2700/4200 -65 to 200 >5 seconds / 4 hours CA6300 Series MSDS
CA6305 Ethyl Clear 8 1000 2700/4200 -65 to 200 >7.5 seconds / 4 hours CA6300 Series MSDS
CA6306 Ethyl Clear 8 1500 2700/4200 -65 to 200 >7.5 seconds / 4 hours CA6300 Series MSDS
CA6307 Ethyl Clear 9 2000 2700/4200 -65 to 200 >7.5 seconds / 4 hours CA6300 Series MSDS
CA6308 Ethyl Clear 9 3200 2700/4200 -65 to 200 >7.5 seconds / 4 hours CA6300 Series MSDS
CA6309 Ethyl Clear 9 4000 2700/4200 -65 to 200 >7.5 seconds / 4 hours CA6300 Series MSDS
CA6310 Ethyl Clear 10 GEL 2700/4200 -65 to 200 >12.5 seconds / 4 hours CA6300 Series MSDS
Cynergy® Toughened Cyanoacrylate Adhesives

The Cynergy® 6400 SERIES are clear, highly toughened, high peel strength products ideal for bonding dissimilar materials with excellent performance on a wide range of surfaces. They impart superior hot strength, impact and thermal resistance making them ideal for demanding applications.
Product Name Base Color Gap Fill (mil) Viscosity (cps) Shear Strength Temp. Range °F Cure Speed (fixture/full cure) MSDS
CA6401 Ethyl Clear 6 300 3750 -65 to 250 >10 seconds / 4 hours CA6400 Series MSDS
CA6402 Ethyl Clear 8 800 3750 -65 to 250 >15 seconds / 4 hours CA6400 Series MSDS
CA6403 Ethyl Clear 10 2400 3750 -65 to 250 >15 seconds / 4 hours CA6400 Series MSDS
CA6404 Ethyl Clear 10 4000 3750 -65 to 250 >18 seconds / 4 hours CA6400 Series MSDS
CA6405 Ethyl Clear 12 5000 3750 -65 to 250 >18 seconds / 4 hours CA6400 Series MSDS
Cynergy® Black, Toughened Cyanoacrylate Adhesives

The Cynergy® 6500 SERIES are black, highly toughened, high peel strength products ideal for bonding dissimilar materials with excellent performance on a wide range of surfaces. They impart superior vibration, impact and thermal cycling resistance making them ideal for high stress applications.
Product Name Base Color Gap Fill (mil) Viscosity (cps) Shear Strength Temp. Range °F Cure Speed (fixture/full cure) MSDS
CA6501 Ethyl Black 8 300 3750 -65 to 250 >10 seconds / 8 hours CA6500 Series MSDS
CA6502 Ethyl Black 9 1000 3750 -65 to 250 >12 seconds / 8 hours CA6500 Series MSDS
CA6503 Ethyl Black 10 4000 3750 -65 to 250 >18 seconds / 8 hours CA6500 Series MSDS
Cynergy® Low Odor, No Bloom Cyanoacrylate Adhesives

The Cynergy® 6700 SERIES are modified to provide greatly reduced odor and a further reduction of bloom or frosting of plastics when compared to the 6600 Series. These products are ideal for bonding dissimilar materials with excellent performance on a wide range of surfaces. They also reduce the need for extensive ventilation equipment.
Product Name Base Color Gap Fill (mil) Viscosity (cps) Shear Strength Temp. Range °F Cure Speed (fixture/full cure) MSDS
CA6701 Modified Clear 2 5 1900/3000 -65 to 200 >7 seconds / 8 hours CA6700 Series MSDS
CA6702 Modified Clear 5 100 1900/3000 -65 to 200 >15 seconds / 8 hours CA6700 Series MSDS
CA6703 Modified Clear 6 500 1900/2900 -65 to 200 >20 seconds / 8 hours CA6700 Series MSDS
CA6704 Modified Clear 8 1000 1800/2900 -65 to 200 >20 seconds / 8 hours CA6700 Series MSDS
Cynergy® Medical Grade Cyanoacrylate Adhesives

The Cynergy® 6800 SERIES are clear, high strength products ideal for bonding dissimilar materials with excellent performance on a wide range of surfaces. This series of products has USP Class VI Certification and are commonly used in assembling medical devices.

Product Name Base Color Gap Fill (mil) Viscosity (cps) Shear Strength Temp. Range °F Cure Speed (fixture/full cure) MSDS
CA6801 Ethyl Clear 2 5 2700/4300 -65 to 200 >5 seconds / 8 hours CA6800 Series MSDS
CA6802 Ethyl Clear 2 5 2700/4300 -65 to 200 >10 seconds / 8 hours CA6800 Series MSDS
CA6803 Ethyl Clear 3 30 2700/4300 -65 to 200 >10 seconds / 8 hours CA6800 Series MSDS
CA6804 Ethyl Clear 4 45 2700/4300 -65 to 200 >10 seconds / 8 hours CA6800 Series MSDS
CA6805 Ethyl Clear 6 100 2700/4300 -65 to 200 >10 seconds / 8 hours CA6800 Series MSDS
CA6806 Ethyl Clear 6 200 2700/4300 -65 to 200 >10 seconds / 8 hours CA6800 Series MSDS
CA6807 Ethyl Clear 7 500 2700/4300 -65 to 200 >10 seconds / 8 hours CA6800 Series MSDS
CA6808 Ethyl Clear 7 750 2700/4300 -65 to 200 >12 seconds / 8 hours CA6800 Series MSDS
CA6809 Ethyl Clear 8 1000 2700/4300 -65 to 200 >15 seconds / 8 hours CA6800 Series MSDS
CA6810 Ethyl Clear 8 1500 2700/4300 -65 to 200 >15 seconds / 8 hours CA6800 Series MSDS
CA6811 Ethyl Clear 8 2000 2700/4300 -65 to 200 >15 seconds / 8 hours CA6800 Series MSDS
CA6812 Ethyl Clear 8 2400 2700/4300 -65 to 200 >15 seconds / 8 hours CA6800 Series MSDS
CA6813 Ethyl Clear 8 3200 2700/4300 -65 to 200 >15 seconds / 8 hours CA6800 Series MSDS
Cynergy® High Temperature Cyanoacrylate Adhesives

The Cynergy® 6900 SERIES are for use in demanding applications where very fast cure speeds and high temperature resistance are required. These are single component solvent free materials, manufactured in a wide variety of viscosities and setting times to satisfy specific bonding applications. Substrates such a wood, plastics, metal, rubber, or other materials are bonded quickly and effectively with the Cynergy® 6900 series. These products were designed to be used in applications needing to withstand temperature cycling, as well as, extended operation at higher temperatures.

Product Name Base Color Gap Fill (mil) Viscosity (cps) Shear Strength Temp. Range °F Cure Speed (fixture/full cure) MSDS
CA6901 Ethyl Clear 2 5 2700/4200 -65 to 275 >7 seconds / 8 hours CA6900 Series MSDS
CA6902 Ethyl Clear 3 30 2700/4200 -65 to 275 >12 seconds / 8 hours CA6900 Series MSDS
CA6903 Ethyl Clear 6 100 2700/4200 -65 to 275 >14 seconds / 8 hours CA6900 Series MSDS
CA6904 Ethyl Clear 7 500 2700/4200 -65 to 275 >14 seconds / 8 hours CA6900 Series MSDS
CA6905 Ethyl Clear 8 1000 2700/4200 -65 to 275 >18 seconds / 8 hours CA6900 Series MSDS
CA6906 Ethyl Clear 8 1500 2700/4200 -65 to 275 >18 seconds / 8 hours CA6900 Series MSDS
CA6907 Ethyl Clear 8 2400 2700/4200 -65 to 275 >18 seconds / 8 hours CA6900 Series MSDS
CA6908 Ethyl Clear 8 4000 2700/4200 -65 to 275 >20 seconds / 8 hours CA6900 Series MSDS
Cynergy® Cyanoacrylate Adhesive Accessory Products
Product Name Description Primary Solvent Type MSDS
Solvent D Debonder Dissolves cured cyanoacrylates Nitromethane Solvent D MSDS
Primer P Primer for low energy surfaces like PE or PP n-Heptane Primer P MSDS
Surface Activator A Reduces fixture and cure time Acetone Activator A MSDS
Surface Activator H Reduces fixture and cure time n-Heptane Activator H MSDS
Surface Activator I Reduces fixture and cure time Isopropyl Alcohol Activator I MSDS
Surface Activator NF Reduces fixture and cure time n-Propyl Bromide Activator NF MSDS
Surface Activator M Reduces fixture and cure time Mineral Spirits Activator M MSDS