EP 1282 BLACK Two Part Epoxy Casting Resin

	Name: EP 1282 BLACK Two Part Epoxy Casting Resin
	Part #: EP1282 BLACK 50ML
	Description: Resinlab™ EP 1282 Black is a two part unfilled electronic grade epoxy encapsulant designed for medium sized castings.
	Typical Use: It has good wetting and adhesion to most surfaces and is free flowing to penetrate voids and give good air release and a smooth high gloss surface. It has very good resistance to water, acids and bases and most organic solvents. Th
Documents	Color/Appearance: Black
	1 Or 2 Part: 2	Base Chemistry: Epoxy
	Viscosity Cp: 3,000	Gap Fill:
	Service Temperature: -50 to 150°C	Rt Tack Free Time:
	Cure Time: 24 – 48 hours or 1 hour at 65°C to 20 minutes at 100°C	Shear Strength Psi:
	Tensile Strength: 1800	Specific Gravity: 1.06
	Flash Point: 200°F	Dielectric Strength: 440 v/mil
	Durometer/Hardness: 40 D	Elongation: 200%
	Mix Ratio: 1:1	Peel Strength:
	Shelf Life: 12 months at 25°C. Specialty packaging may be less.	Thermal Conductivity: 0.14
	Volume Resistivity: 2.5 x 1011 ohm-cm	Work Life/Pot Life: 90 – 120 minutes