Resinlab Casting Resin EP1121 Part B 5 Gallon Black

	Name: Resinlab Casting Resin EP1121 Part B 5 Gallon Black
	Part #: EP1121 BLACK - B PL
	Description: Resinlab™ EP 1121 Black is a two part unfilled electronic grade epoxy encapsulant designed for small to medium sized castings. It cures completely at room temperature to a tough, flexible polymer.
	Typical Use: Its low viscosity allows for good wicking and penetration into components and circuitry and also gives good air release. It has very good resistance to water, acids and bases and most organic solvents.
Documents	Color/Appearance: Black
	1 Or 2 Part: 2	Base Chemistry:
	Viscosity Cp: 2,000 cps	Gap Fill:
	Service Temperature:	Rt Tack Free Time:
	Cure Time:	Shear Strength Psi:
	Tensile Strength: 1000	Specific Gravity: 0.97
	Flash Point:	Dielectric Strength: 440 v/mil
	Durometer/Hardness: 40	Elongation: 90 %
	Mix Ratio: 1A:1B	Peel Strength:
	Shelf Life:	Thermal Conductivity: 0.14
	Volume Resistivity: 8 x 10^14 ohm-cm	Work Life/Pot Life: 60 – 90 minutes