Epoxy Adhesives

Resinlab epoxy adhesives produce exceptionally high strength bonds to metals, ceramics, most plastics and glass, often exceeding the strength of the substrates. They possess very good water and chemical resistance and have very high heat resistance. Since our epoxy adhesives are VOC free, they have very little shrinkage upon curing. They also do not distort thin substrates. Our epoxy adhesives process easily in bulk as well as cartridge dispensing. They are also workplace and environmentally friendly.

Epoxy Adhesive Product Overview

Product Name	Mixed Viscosity	Product's Key Features	Pot Life	Shore Hardness	Mix Ratio	Temp. Range
EP 11 HT Gray	700,000 cps	High strength, impact resistant general purpose metal bonding epoxy adhesive. Good resistance to acids, bases and most chemicals.	>2 Hours	80D	1/1 volume	-40° to 150°C
EP 11 HTFS Gray	750,000 cps	Fast setting version of above. A high strength, impact resistant general purpose metal bonding epoxy adhesive. Good resistance to acids, bases and most chemicals.	30-40 minutes	85D	1/1 volume	-40° to 150°C
EP 750 Clear	12,500 cps	High strength, impact resistant epoxy adhesive. Conforms to CFR Title 21 175.105 and 175.300 for water or food contact aplications. Good resistance to acids, bases and most chemicals.	> 2 Hours	80D	1/1 volume	-40° to 150°C
EP 950 G Gray	750,000 cps	One part heat cure aluminum filled, non sag viscosity thermally conductive epoxy adhesive. Cures to a rigid high modulus polymer with exceptional impact and shear strength.	3 months at 25°C	65D	N/A	-40° to 175°C
EP 950 NMF Gray	750,000 cps	One part heat cure non-metallic filled, non sag viscosity structurral epoxy adhesive. Cures to a rigid high modulus polymer with exceptional impact and shear strength.	3 months at 25°C	65D	N/A	-40° to 175°C
EP 1026 Clear	15,500 cps	Fast setting 5 minute type epoxy for rapid parts assembly. Excellent optical clarity and stability. Good water and chemical resistance.	3-5 minutes	85D	1/1 volume	-40° to 90°C
EP 1026 Black	15,500 cps	Fast setting 5 minute type epoxy for rapid parts assembly. Good water and chemical resistance.	3-5 minutes	85D	1/1 volume	-40° to 90°C
EP 1026 R Clear	11,000 cps	Rubber toughened version of above for improved peel and impact resistance, rapid parts assembly. Good water and chemical resistance.	3-5 minutes	75D	1/1 volume	-40° to 90°C
EP 1026 HP	12,500 cps	Epoxy / Acrylic hybrid toughened version of above for improved peel and impact resistance, rapid parts assembly. Good water and chemical resistance.	3-5 minutes	85D	1/1 volume	-40° to 130°C
EP 1056 LC Black	165,000 cps	Epoxy / urethane modifed hybrid structural adhesive for bonding PVC and other hard to bond substrates. Good temperature and chemical resistance.	30 minutes	80D	1/1 volume	-40° to 150°C
EP 1115 Clear	50,000 cps	Fast curing mercaptan/polyamide hybrid epoxy adhesive. Provides a good compbination of fast cure to handle and improved temperature and chemical resistance over standard 5 minute epoxy.	8-12 minutes	80 D	1/1 volume	-40° to 130°C
EP1199 Clear	9,000 cps	Medium fast curing, clear, high gloss free flowing adhesive suitable for impregnation, glass lay-up and small potting applciations.	8-12 minutes	80D	1/1 volume	-40° to 150°C
EP 1199 Black	9,000 cps	Medium fast curing, clear, high gloss free flowing adhesive suitable for impregnation, glass lay-up and small potting applciations.	8-12 minutes	80D	1/1 volume	-40° to 150°C
EP 1215 Clear	22,500 cps	Clear / amber, long pot life general purpose epoxy adhesive. Adjustable flexibility by varying the mix ratio of A to B.	2-3 hours	Variable	Variable	-40° to 150°C
EP 1225 Black	30,000 cps	Epoxy / urethane modifed hybrid structural adhesive for bonding PVC and other hard to bond substrates. Excellent low temperature properties.	10-20 minutes	60D	2/1 volume	-40° to 100°C
EP 1238	65,000 cps	Epoxy / Acrylic hybrid toughened version for improved peel and impact resistance, controlled flow and fast cure for rapid parts assembly. Excellent water and chemical resistance.	20 minutes	80D	2/1 volume	-40° to 150°C
EP 1238 Black	65,000 cps	Epoxy / Acrylic hybrid toughened version for improved peel and impact resistance, controlled flow and fast cure for rapid parts assembly. Excellent water and chemical resistance.	20 minutes	80D	2/1 volume	-40° to 150°C
EP 1287	Light Paste	Very fast curing 0.55 gr/cc density syntactic foam. Designed to meet the requirments of FAR25.853 flame retardant specification. Suitable for side-by-side cartridge dispensing.	4-6 minutes	60D	2/1 volume	-40° to 150°C
EP1290 Clear	90,000 cps	Highly flexible, high strength, impact resistant general purpose epoxy adhesive. Moderate viscosity, self leveling. Good resistance to acids, bases and most chemicals.	> 2 hours	60D	1/1 volume	-40° to 150°C
EP 1290 Gray	90,000 cps	Highly flexible, high strength, impact resistant general purpose epoxy adhesive. Moderate viscosity, self leveling. Good resistance to acids, bases and most chemicals.	> 2 hours	60D	1/1 volume	-40° to 150°C
EP 1294	Light Paste	Medium fast curing 0.60 gr/cc density syntactic foam. Designed to meet the requirments of FAR25.853 flame retardant specification. Suitable for side-by-side cartridge dispensing.	8-12 minutes	55D	2/1 volume	-40° to 150°C
EP 1305 Black	400,000 cps	Fast curing, non-sag paste viscosity, excellent adhesion peel strength and adhesion to metals, PVC, most engineering thermoplastics. Excellent thermal cycle characteristics water and chemical resistance.	15 minutes	55D	1/1 volume	-40° to 150°C
EP 1320	100,000 cps	One part heat cure filled conformal coating or small mass potting system. Excellent adhesion to FR-4, low shrinkage and stress on components upon cure.	6 months at 5°C	85D	N/A	-40° to 150°C
EP 1320 LV	40,000 cps	Low viscosity version of above	6 months at 5°C	85D	N/A	-40° to 150°C
EP 1325	500,000 cps	One part heat cure filled conformal coating or small mass potting system. Excellent adhesion to FR-4, low shrinkage and stress on components upon cure.	6 months at 5°C	85D	N/A	-40° to 150°C
EP 1325 LV	250,000 cps	Low viscosity version of EP 1325.	6 months at 5°C	85D	N/A	-40° to 150°C
EP 1330	500,000 cps	One part heat cure highly filled, non sag viscosity thermally conductive epoxy adhesive. Cures quickly to a rigid high modulus polymer with a low CTE and shrinkage.	6 months at 5°C	90D	N/A	-40° to 150°C

Product Name

Mixed Viscosity

Product's Key Features

Pot Life

Shore Hardness

Mix Ratio

Temp. Range

Docs

EP 11 HT Gray

700,000 cps

High strength, impact resistant general purpose metal bonding epoxy adhesive. Good resistance to acids, bases and most chemicals.

>2 Hours

80D

1/1 volume

-40° to 150°C

EP 11 HTFS Gray

750,000 cps

Fast setting version of above. A high strength, impact resistant general purpose metal bonding epoxy adhesive. Good resistance to acids, bases and most chemicals.

30-40 minutes

85D

1/1 volume

-40° to 150°C

EP 750 Clear

12,500 cps

High strength, impact resistant epoxy adhesive. Conforms to CFR Title 21 175.105 and 175.300 for water or food contact aplications. Good resistance to acids, bases and most chemicals.

> 2 Hours

80D

1/1 volume

-40° to 150°C

EP 950 G Gray

750,000 cps

One part heat cure aluminum filled, non sag viscosity thermally conductive epoxy adhesive. Cures to a rigid high modulus polymer with exceptional impact and shear strength.

3 months at 25°C

65D

N/A

-40° to 175°C

EP 950 NMF Gray

750,000 cps

One part heat cure non-metallic filled, non sag viscosity structurral epoxy adhesive. Cures to a rigid high modulus polymer with exceptional impact and shear strength.

3 months at 25°C

65D

N/A

-40° to 175°C

EP 1026 Clear

15,500 cps

Fast setting 5 minute type epoxy for rapid parts assembly. Excellent optical clarity and stability. Good water and chemical resistance.

3-5 minutes

85D

1/1 volume

-40° to 90°C

EP 1026 Black

15,500 cps

Fast setting 5 minute type epoxy for rapid parts assembly. Good water and chemical resistance.

3-5 minutes

85D

1/1 volume

-40° to 90°C

EP 1026 R Clear

11,000 cps

Rubber toughened version of above for improved peel and impact resistance, rapid parts assembly. Good water and chemical resistance.

3-5 minutes

75D

1/1 volume

-40° to 90°C

EP 1026 HP

12,500 cps

Epoxy / Acrylic hybrid toughened version of above for improved peel and impact resistance, rapid parts assembly. Good water and chemical resistance.

3-5 minutes

85D

1/1 volume

-40° to 130°C

EP 1056 LC Black

165,000 cps

Epoxy / urethane modifed hybrid structural adhesive for bonding PVC and other hard to bond substrates. Good temperature and chemical resistance.

30 minutes

80D

1/1 volume

-40° to 150°C

EP 1115 Clear

50,000 cps

Fast curing mercaptan/polyamide hybrid epoxy adhesive. Provides a good compbination of fast cure to handle and improved temperature and chemical resistance over standard 5 minute epoxy.

8-12 minutes

80 D

1/1 volume

-40° to 130°C

EP1199 Clear

9,000 cps

Medium fast curing, clear, high gloss free flowing adhesive suitable for impregnation, glass lay-up and small potting applciations.

8-12 minutes

80D

1/1 volume

-40° to 150°C

EP 1199 Black

9,000 cps

Medium fast curing, clear, high gloss free flowing adhesive suitable for impregnation, glass lay-up and small potting applciations.

8-12 minutes

80D

1/1 volume

-40° to 150°C

EP 1215 Clear

22,500 cps

Clear / amber, long pot life general purpose epoxy adhesive. Adjustable flexibility by varying the mix ratio of A to B.

2-3 hours

Variable

-40° to 150°C

EP 1225 Black

30,000 cps

Epoxy / urethane modifed hybrid structural adhesive for bonding PVC and other hard to bond substrates. Excellent low temperature properties.

10-20 minutes

60D

2/1 volume

-40° to 100°C

EP 1238

65,000 cps

Epoxy / Acrylic hybrid toughened version for improved peel and impact resistance, controlled flow and fast cure for rapid parts assembly. Excellent water and chemical resistance.

20 minutes

80D

2/1 volume

-40° to 150°C

EP 1238 Black

65,000 cps

Epoxy / Acrylic hybrid toughened version for improved peel and impact resistance, controlled flow and fast cure for rapid parts assembly. Excellent water and chemical resistance.

20 minutes

80D

2/1 volume

-40° to 150°C

EP 1287

Light Paste

Very fast curing 0.55 gr/cc density syntactic foam. Designed to meet the requirments of FAR25.853 flame retardant specification. Suitable for side-by-side cartridge dispensing.

4-6 minutes

60D

2/1 volume

-40° to 150°C

EP1290 Clear

90,000 cps

Highly flexible, high strength, impact resistant general purpose epoxy adhesive. Moderate viscosity, self leveling. Good resistance to acids, bases and most chemicals.

> 2 hours

60D

1/1 volume

-40° to 150°C

EP 1290 Gray

90,000 cps

Highly flexible, high strength, impact resistant general purpose epoxy adhesive. Moderate viscosity, self leveling. Good resistance to acids, bases and most chemicals.

> 2 hours

60D

1/1 volume

-40° to 150°C

EP 1294

Light Paste

Medium fast curing 0.60 gr/cc density syntactic foam. Designed to meet the requirments of FAR25.853 flame retardant specification. Suitable for side-by-side cartridge dispensing.

8-12 minutes

55D

2/1 volume

-40° to 150°C

EP 1305 Black

400,000 cps

Fast curing, non-sag paste viscosity, excellent adhesion peel strength and adhesion to metals, PVC, most engineering thermoplastics. Excellent thermal cycle characteristics water and chemical resistance.

15 minutes

55D

1/1 volume

-40° to 150°C

EP 1320

100,000 cps

One part heat cure filled conformal coating or small mass potting system. Excellent adhesion to FR-4, low shrinkage and stress on components upon cure.

6 months at 5°C

85D

N/A

-40° to 150°C

EP 1320 LV

40,000 cps

Low viscosity version of above

6 months at 5°C

85D

N/A

-40° to 150°C

EP 1325

500,000 cps

One part heat cure filled conformal coating or small mass potting system. Excellent adhesion to FR-4, low shrinkage and stress on components upon cure.

6 months at 5°C

85D

N/A

-40° to 150°C

EP 1325 LV

250,000 cps

Low viscosity version of EP 1325.

6 months at 5°C

85D

N/A

-40° to 150°C

EP 1330

500,000 cps

One part heat cure highly filled, non sag viscosity thermally conductive epoxy adhesive. Cures quickly to a rigid high modulus polymer with a low CTE and shrinkage.

6 months at 5°C

90D

N/A

-40° to 150°C