Anaerobic Adhesives

 
ResinLab Cynergy® anaerobic adhesives are also known as threadlockers or retaining compounds. They are one-component liquids that solidify in the absence of oxygen, when trapped between mated surfaces such as the threads of a nut and bolt, or between concentric assemblies. They can be sensitive to the types of metals surrounding them. Cynergy® anaerobic adhesives are available in various strengths and viscosities to adapt to a wide array of applications.

 

RC 8000 Series: Anaerobic Retaining Compounds

The RC 8000 Series anaerobic retaining compounds are designed for use in demanding applications to fill the spaces and surface irregularities between tightly mated cylindrical parts. These products form a tough, permanent bond which greatly enhances the torque and pullout strength. This technology increases the reliability and performance of assemblies, while reducing dependence upon maintaining costly tight machining tolerances.

ProductColorViscosity (cps)Specific GravityShear Strength (psi)Temperature Range (°C)Cure Speed (fixture/full cure)Gap Fill (mil)
RC8003Green1251.103,800-53.9 to 176.710min/8h5
RC8009Green1251.103,800-53.9 to 176.715min/8h5
RC8020Green8,5001.164,000-53.9 to 232.215min/8h15
RC8035Green2,0001.054,200-53.9 to 176.710min/8h10
RC8038Green2,5001.024,500-53.9 to 176.72min/8h10
RC8040Green6001.123,500-53.9 to 232.240min/8h7
RC8041Yellow7501.071,800-53.9 to 176.715min/8h10
RC8048Green5001.134,000-53.9 to 176.72min/8h6
RC8060Silver250,0001.133,500-53.9 to 176.710min/8h20
RC8075Green1251.093,500-53.9 to 176.730min/8h5
RC8080Green1,4001.114,200-53.9 to 232.25min/8h15

 

TL 5000 Series: Anaerobic Threadlocking Compounds

Like the RC 8000 Series, the TL5000 Series anaerobic threadlocking compounds are designed for use in demanding applications to fill the spaces and surface irregularities between tightly mated cylindrical parts. These products are highly resistant to heat, corrosion, vibration, water gases, oils and many other chemicals.

ProductColorViscosity (cps)Specific GravityTemperature Range (°C)Cure Speed (fixture/full cure)
TL5021Violet2001.08-51.1 to 176.710min/8h
TL5022Purple1,2001.05-51.1 to 176.710min/8h
TL5041Blue2001.08-51.1 to 176.710min/8h
TL5042Blue1,2001.07-51.1 to 176.710min/8h
TL5043Blue5,0001.08-51.1 to 176.710min/8h
TL5062Red3,5001.05-51.1 to 176.710min/8h
TL5071Red5001.12-51.1 to 176.710min/8h
TL5072Red9,0001.11-51.1 to 176.715min/24h
TL5077Red7,0001.12-51.1 to 176.710min/8h
TL5090Green121.08-51.1 to 176.710min/8h

 

Contact an experienced representative for more information on ResinLab anaerobic adhesives or request a quote.

 

Contact Us